coineltech

(Click on individual Images or more option for details on the project)


Hair Implant Unit

Hair Transplant Unit 3.0 is the 3rd version board that the customer was designing and chose CoiNel for the job. It included the hardware design for two MCU (Cypress and Renesas) boards with a 10.4 inch TFT interface with a external TFT driver with relevant interfaces. The RX62 (32 bit series controller from Renesas) Based Board that can drive a 10.4inch TFT via external... more


Data Recorder




LPC1764 (32 bit Cortex M3 controller from NXP) Based design with options for ADC and digital inputs for sensor connectivity with interface options on ethernet, CAN and GSN/GPRS... more





RX62N Board

RX62 (32 bit controller from Renesas) Based Board that can drive a 10.4inch TFT via external EPSON (S1D113517) driver with capability to communicate to the main board and decide/move events based on communication protocol formulated. The board also has options to drive Multiple TFT ranges (3.2, 3.5,4.3 and 7 inch) by internal TFT driver of the controller. The board also has peripherals/interfaces such as USB Host, Ethernet, EEPROM, Flash, RAM...more



Calsi


LPC1788 (32 bit Cortex M3 controller from NXP) Based design that can run an 3.5inch TFT and has onboard NAND Flash, RAM, SD card, USB, Matrix Keypad and a battery connector. The device shall be used to calculate complex algorithms required for mechanical engineers... more