coineltech

3.2inch TFT without Touch

Item Code - ILI3P2
  • Resolution: 320 x 240
  • Display Driver: ILI9341
  • Interface: SPI, Parallel RGB (optional)
  • TFT Module Size: 55.94 (W) x 77.60 (H) x 3.6 (T) mm
Currency
Stock Available : 69

Availability: In stock

Rs. 2,600.00
Cash on Delivery

3.2inch TFT without Touch

More Views

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This display breakout board is the best way to add a colorful and bright display to any application/project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller with SPI communication protocol.

The TFT display is 3.2" wide and has 320x240 color pixels. The TFT driver (ILI9341) can display full 6-6-6 (R-G-B) and is configurable. The example code uses 5-6-5 (R-G-B).

The display comes with the connectivity board that can be interfaced to the target controller through a 14 pin, 2.54mm flat cable.. The unit can be used as an external interface display card for various applications.

The pinout diagram of the connectivity board used for the TFT is as below

MultiTFT_14PIN_Conn
Note: PIN 4,6,8,10,12 are used for the touchscreen interface.

Specifications:

  • TFT Model: KWH032ST05-F01
  • Display Driver IC: ILI9341
  • Display Interface : SPI.
  • Touchscreen: Not Available
  • Number of Pixels: 240 (RGB) x 320
  • Pixel Pitch: 0.2025 x 0.2025 mm
  • Active Area: 48.6 x 64.8 mm
  • TFT Module Size: 55.94 (W) x 77.60 (H) x 3.6 (T)
  • Backlight: 5 x White LED (Parallel)
  • Board Size: 57 x 100 mm

Delivarables:

  • 3.2” TFT Display with Board.
    • loaded with 14 pin connector.
  • 14 Pin Flat cables

Initial Setting of board:

  • SPI (resistor setting done accordingly)
  • Resistor needs to be changed to use as parallel RGB.
    • Not applicable for current module

PRODUCT ORDERING CODE: ILI3P2

Datasheets

Datasheet of KWH032ST05-F02 (pdf, 1110 KB)
 
Datasheet of ILI9341 - TFT Driver (pdf, 3421 KB)
 
User Manual for the 3.2inch Board (SPI) (pdf, 493 KB)
 

 

Sample Source Code

Sample Source Code using ILI9341 (SPI) on LPC1768 HPLUS Ex (WinZip, 80 KB)